|Temperatures for December 2016 were lower than December 2015 by 3.9 degrees. North Texas had a significant decrease in monthly rainfall from last December with 3.23 inches less than in December 2015. Compared to December 2015, the average wind speed was increased by 0.96 mph. Six nights were below 32 degrees and two days were above 80 degrees. Members should expect December 2016 consumption to be similar or slightly higher than December 2015.|
It’s no secret that temperature extremes can contribute to high utility bills. Keep up with the current forecast
and view Weather SmartStats, updated monthly, on this page to determine:
- the effect of high, low and average temperatures on your energy usage
- how average monthly wind speeds affected home air infiltration
- how much rain fell in North Texas
- the number of Heating and Cooling Degree Days
For a customized view of how weather affects your monthly energy usage, log in to your CoServ account. From there, you can compare your energy consumption charts or data with local temperatures, your neighborhood and CoServ. This allows you to easily see how weather affects your energy bill by charting high, average and low temperatures that are displayed just beneath your usage.
Find out more about the weather’s effect on your energy usage at the National Weather Service. You’ll find current conditions and extended forecasts.
You can also learn how to save energy no matter how hot or cold it is outside.
What is a "Heating Degree Day" and "Cooling Degree Day"?
A "degree day" is a unit of measurement that records how hot or how cold it has been over a 24-hour period. It also reflects demand for energy to heat or cool houses and businesses. The number of degree-days applied to any particular day of the week is determined by calculating the mean temperature for the day and then comparing the mean temperature to a base value of 65 degrees Fahrenheit. (The "mean" temperature is calculated by adding together the high for the day and the low for the day, and then dividing the result by 2.) For example, if the mean temperature for the day is 5 degrees higher than 65, then there has been a 5° cooling degree day. On the other hand, if temperatures have been cooler and the mean temperature is 55 degrees, then there has been a 10° heating degree day (65 minus 55 equals 10).